Category Archives: hpe6-a79 exam questions

How to achieve HP HPE6-A79 certification for a successful career

Posted on by
HPE6-A79 exam

Getting HP ACMX certification opens the door to many opportunities. But how do you achieve this? Very simple! All you need to do is prepare for the exam with the latest and most effective HPE6-A79 exam dumps from a trusted source. You can get the full HPE6-A79 exam dumps https://www.pass4itsure.com/hpe6-a79.html (Q-As: 55) actual HPE6-A79 exam questions at Pass4itSure.

Shares latest updated HP HPE6-A79 exam dumps practice questions

Shared some of the latest updated HPE6-A79 exam practice questions to help you improve your exam pass rate!

Free actual HPE6-A79 exam dumps PDF

[HPE6-A79 PDF] https://drive.google.com/file/d/1wyaAu8qRGq8pwg1rWzkDPZazBExsiOvl/view?usp=sharing you can download it online. 

Pass4itSure HPE6-A79 dumps pdf helps you to prepare HP exam quickly and perfectly.

HP HPE6-A79 exam dumps online practice test

QUESTION 1 #

Refer to the exhibit.

The network administrator must ensure that the configuration will force users to authenticate periodically every eight
hours. Which configuration is required to effect this change?
A. Set the reauth-period to 28800 to enable reauthentication in the dot1x profile.
B. Set the reauth-period to 28800 to enable reauthentication in the AAA profile.
C. Set the reauth-period to 28800 to enable reauthentication in both dot1x and AAA profiles.
D. Set the reauth-period to 28800 in the dot1x profile and enable reauthentication in the AAA profile.
Correct Answer: A

QUESTION 2 #

Users run encrypted Skype for Business traffic with no WMM support over an Aruba Mobility Master (MM) – Mobility
Controller (MC) based network. When voice, video, and application sharing traffic arrive at the wired side of the network, all the flows look alike due to the lack of L2 and L3 markings
How can the network administrator identify these flows and mark QoS accordingly?

A. Confirm the MC is the Openflow controller of the MMs and Openflow is enabled in VAP and the firewall roles. Then
enable WMM in a VAP profile.
B. Use a media firewall policy that matches these three flows, and use permit and TOS actions with 56, 40, and 34 values
for voice, video, and application sharing, respectively. Then enable the Skype4Business ALG in the UCC profiles.
C. Confirm the MC is the Openflow controller of the MMs and Openflow is enabled in VAP and the firewall roles. Then
enable the Skype4Business ALG in the UCC profiles.
D. Confirm the MM is the Openflow controller of the MCs and Openflow is enabled in VAP and the firewall roles. Then
integrate the MM with the Skype4Business SDN API, and enable the Skype4Business ALG in the UCC profiles.
Correct Answer: D

QUESTION 3 #

An organization owns a fully functional multi-controller Aruba network with a Virtual Mobility Master (VMM) in VLAN20.
They have asked a network consultant to deploy a redundant MM on a different server. The solution must offer the
lowest convergence time and require no human interaction in case of failure.

The servers host other virtual machines and are connected to different switches that implement ACLs to protect them.
The organization grants the network consultant access to the servers only and appoints a network administrator to
assist with the deployment. What must the network administrator do so the network consultant can successfully deploy the solution? (Choose two.)

A. Allocate VLAN20 to the second server, and extend it throughout the switches, then reserve one IP address for the
second MM and another IP address for its gateway.
B. Allocate VLAN20 to the second server, and permit routing between them, then reserve one IP address for the second
MM and another IP address for its gateway.
C. Configure an ACL entry that permits IP protocol 50, UDP port 500, and multicast IP 224.0.0.18.
D. Allocate VLAN20 to the second server, and extend it throughout the switches, then reserve one IP address for the
second MM and another for the VIP.
E. Configure an ACL entry that permits UDP 500, TCP 4500, and multicast IP 224.0.0.5.
Correct Answer: AE

QUESTION 4 #

Refer to the exhibit.

Based on the output shown in the exhibit, with which Aruba devices have Access-1 established tunnels?
A. a pair of standalone MCs
B. a pair of switches running VXLAN
C. a pair of MCs within an L3 cluster
D. a single standalone MC
Correct Answer: C

QUESTION 5 #

Refer to the exhibit.

A network administrator is evaluating a deployment to validate that a user is assigned the proper role and reviews the
output in the exhibit. How is the role assigned to the user?
A. The MC assigned the role based on Aruba VSAs.
B. The MC assigned the machine authentication default user role.
C. The MC assigned the default role based on the authentication method.
D. The MC assigned the role based on server derivation rules.
Correct Answer: C

QUESTION 6 #

A software development company has 764 employees who work from home. The company also has small offices
located in different cities throughout the world. During working hours, they use RAPs to connect to a data center to
upload software code as well as interact with databases.

In the past two months, cabling issues have occurred connection to the 7240XM Mobility Controller (MC) that runs
ArubaOS 8 and terminates the RAPs. These RAPs disconnect, affecting the users connected to the RAPs. This also
causes problems with code uploads and database synchronizations. Therefore, the company decides to add a second
7240XM controller for redundancy.

How should the network administrator deploy both controllers in order to provide the redundancy while preventing
failover events from disconnecting users?
A. Connect both controllers with common VLANs and create an HA fast failover group with public addresses in the
internet VLAN.
B. Connect both controllers with common VLANs and create an L2-connected cluster using public addresses in the
internet VLAN.
C. Connect both controllers with different VLANs and create an L2-connected cluster using public addresses in the
internet VLAN.
D. Connect both controllers with common VLANs, and configure LMS/BLMS values equal to public addresses in the
internet VLAN.
Correct Answer: A

QUESTION 7 #

A network administrator has racked up a 7210 Mobility Controller (MC) that will be terminating 200+ Apps on a medium-size branch office. Next, the technician called the appliance with 4SPF+ Direct Attached Cables (DACs) distributed between two-member switching stacks and powered it up.
What must the administrator do next in the MCs to assure maximum wired bandwidth utilization?

A. Map the four physical ports to port channel 0.
B. Disable spanning tree and allocate unique VLANs to each port.
C. Manually set 10Gbps speeds on all ports.
D. Configure the same MSTP region that the switches have.
E. Make all ports trunk interfaces and permit data VLANs.
Correct Answer: C

QUESTION 8 #

Refer to the exhibit.

An Aruba network is deployed with L2 and L3 Mobility Master (MM) redundancy across two data centers, as shown in
the exhibit. The network administrator confirms that all Mobility Controllers (MC) are currently communicating with MM1,
which is the L2 Active and, L3 Primary.
Which MM IP will MCs communicate with if MM1 fails?
A. 10.1.1.10
B. 10.1.1.12
C. 10.2.1.10
D. 10.2.1.21
Correct Answer: C

QUESTION 9 #

Refer to the exhibit.

After deploying several cluster pairs, the network administrator notices that all APs assigned to Cluster1 communicate
with MC1 instead of being distributed between members of the cluster. Also, no IP addresses are shown under the
Standby IP column.
What should the network administrator do to fix this situation?
A. Apply the same cluster profile to both members.
B. Enable Cluster AP load balancing.
C. Rename the cluster profile as “CLUSTER1”.
D. Place MCs at the same hierarchical group level.
Correct Answer: C

QUESTION 10 #

Refer to the exhibit.
A network engineer deploys two different DHCP pools in an Instant AP (IAP) cluster for WLANs that will have
connectivity to a remote site using Aruba IPSec. Based on the output shown in the exhibit, which IAP-VPN DHCP
modes are being used?
A. distributed L3 and centralized L2
B. local L3 and centralized L2
C. local L3 and distributed L2
D. centralized L3 and distributed L2
Correct Answer: D

QUESTION 11 #

HOTSPOT
A network administrator wants to receive a major alarm every time a controller or an Aruba switch goes down for either a local or an upstream device failure. Which alarm definition must the network administrator create to accomplish this?
Hot Area:

Correct Answer:

QUESTION 12 #

HOTSPOT
A network administrator wants to receive a warning level alarm every time the noise floor rises above -82 dBm on any of
the AP radios.
Which alarm definition must the network administrator create to accomplish this?
Hot Area:

QUESTION 13 #

A network administrator wants to permit explicit SSH, FTP and HHTP(s) access to servers in the 10.100.20.5 to
10.100.20.31 range, all devices in the 10.100.21.0/24 network, and a host with IP address 10.100.22.70. The services must work properly at all times.
Which configuration scripts accomplish this task with the fewer number lines while avoiding access to other devices
not included in these ranges? (Choose two.)

A. Option A
B. Option B
C. Option C
D. Option D
E. Option E
Correct Answer: AB

Finally

All free content comes from real exam content! Passing the exam is not enough! Get effective complete HP HPE6-A79 exam questions and answers https://www.pass4itsure.com/hpe6-a79.html (PDF +VCE). Help you pass the exam 100% successfully.

free HPE6-A79 dumps pdf https://drive.google.com/file/d/1wyaAu8qRGq8pwg1rWzkDPZazBExsiOvl/view?usp=sharing is here.