Category Archives: hpe6-a81 exam

HPE6-A81 Dumps [Real Training] Questions To Pass Aruba Certified ClearPass Expert Written Exam

Posted on by

We strongly recommend preparing for the Aruba Certified ClearPass Expert Written exam by obtaining the real training hpe6-A81 dumps questions. The HPE6-A81 dumps with training questions and precise answers are valid for the exam and will help you pass Aruba Certified ClearPass Professional (ACCP) HPE6-A81.

Best Training HPE6-A81 Dumps: https://www.pass4itsure.com/hpe6-a81.html

Come check quality: Free HPE6-A81 Dumps Questions

QUESTION 1

Refer to the Exhibit:

A customer wants to integrate posture validation into an Aruba Wireless 802.1X authentication service
During testing, the client connects to the Aruba Employee Secure SSID and is redirected to the Captive Portal page.

where the user can download the OnGuard Agent After the Agent is installed, the client receives the Healthy token the client remains connected to the Captive Portal page ClearPass is assigning the endpoint the following roles: T2-StaffUser. (Machine Authenticated! and T2-SOL-Device.

What could cause this behavior?

A. The Enforcement Policy conditions for rule 1 are not configured correctly.
B. Used Cached Results: has not been enabled In the Aruba 802.1X Wireless Service
C. RFC-3576 Is not configured correctly on the Aruba Controller and does not update the role.
D. The Enforcement Profile should bounce the connection instead of a Terminate session

Correct Answer: B

QUESTION 2

Under Onboard management and control, which option will deny the user from re-provisioning the device a second time?

A. Revoke and Delete certificate
B. Delete user
C. Revoke certificate
D. Delete certificate

Correct Answer: D

QUESTION 3

A Customer has these requirements:

*2.000 loT endpoints that use MAC authentication
*6,000 endpoints using a mix of username/password and certificate (Corporate/BYOD) based authentication
*1,000 guest endpoints at peak usage that use guest self-registration
*1500 BYOD devices estimated as 3 devices per User (500 users)
*2,500 endpoints that have OnGuard installed and connect on a daily basis

What licenses should be installed to meet customer requirements?

A. 11,500 Access, 500 Onboard, 2,500 Onguard
B. 13.000 Access, 1.500 Onboard, 2,500 Onguard
C. 11,500 Access, 1,500 Onboard, 2.500 Onguard
D. 9,000 Access, 500 Onboard. 2.500 Onguard

Correct Answer: C

QUESTION 4

A customer has acquired another company that has its own Active Directory infrastructure The 802 1X authentication works with the customer’s original Active Directory servers but the customer would like to authenticate users from the acquired company as well. What steps are required, in regards to the Authentication Sources, in order to support this request? (Select two.)

A. Create a new Authentication Source, type Active Directory.
B. Join the ClearPass server(s) to the new AD domain.
C. Add the new AD server(s) as backup into the existing Authentication Source.
D. There is no need to Join ClearPass to the new AD domain.
E. Create a new Authentication Source, type Generic LDAP.

Correct Answer: BD

QUESTION 5

A customer has created a Guest Sett-Registration page that they would like to use as a `template\\’ for all the new pages that are going to be created from now on. Their goal is to ensure that the header and footer on every page are the same, and any edits made to them are automatically reflected on every Self-Registration Page. What should be configured in order to accomplish this request?

A. Save the “template” page as the Master Self-Registration page
B. Create child pages when creating new Self-Registration pages and select the “template” as Parent
C. Save this “template” page as a new Skin to be used on other Self-Registration pages
D. Copy the “template” page and edit it each time a new Self-Registration Page is needed

Correct Answer: C

QUESTION 6

Refer to the exhibit:

When creating a new report, there is an option to send report Notifications by Email. Where is the email server configured?

A. In the ClearPass Policy Manager Endpoint Context servers under Administration.
B. In the Insight Reports Interface under Administration on the sidebar menu.
C. In the insight report on the next screen of the report definition.
D. In the ClearPass Policy Manager Messaging setup under Administration.

Correct Answer: B

QUESTION 7

Refer to the exhibit:

What is true about the Insight Master Server? {Select two)

A. It Is recommended to have an insight server for every zone to limit the traffic between sites.
B. The Publisher is selected by default as Insight Master Server but It can be changed.
C. There is no need to configure an insight Master Server when using default reports and alerts.
D. An insight Master Server should be selected in order to configure reports and alerts.
E. When enabling a server to be the insight Master any existing insight Master is overwritten.

Correct Answer: BD

QUESTION 8

Refer to the exhibit:

A customer has configured onboard in a cluster with two nodes All devices were onboarded in the network through node1 but those clients tail to authenticate through node2 with the error shown. What steps would you suggest to make provisioning and authentication work across the entire cluster? (Select three.)

A. Have all of the BYOD clients re-run the Onboard process
B. Configure the Onboard Root CA to trust the Policy Manager EAP certificate root.
C. Have all of the BYOD clients disconnect and reconnect to my network
D. Make sure that the EAP certificates on both nodes are issued by one common root Certificate Authority (CA).
E. Make sure that the HTTPS certificate on both nodes is issued as a Code Signing certificate
F. Configure the Network Settings on Onboard to trust the Policy Manager EAP certificate

Correct Answer: BDF

QUESTION 9

You are integrating a Postgres SQL server with the ClearPass Policy Manager. What steps will you follow to complete the integration process? (Select three)

A. Click on the default filter name with pre-defined filter queries and a check box to enable as role.
B. Specify a new filter with filter queries to fetch authentication and authorization attributes.
C. Attribute Name under filter configuration must match one of the columns being requested from the database table.
D. Create a new Endpoint context server and add the SQL server IP, credentials, and database name.
E. Alias Name under filter configuration must match one of the columns being requested from the database table.
F. Create a new authentication source and add the SQL server IP, credentials, and database name.

Correct Answer: BDF

QUESTION 10

Refer to the exhibit:

A customer with multiple Aruba Controllers has just installed a new certificate for “*.customerdomain com” on all Aruba Controllers. While testing the existing guest Self-Registration page the customer noticed that the logins are failing. While troubleshooting they are finding no entries in the Event Viewer or Access Tracker for the tests.

Suspecting that the Aruba Controllers may not be properly posting the credentials from the guest browser, they open the NAS Vendor Settings for the Guest Self-Registration Page. From the screen shown, how can you fix the errors?

A. Change the “IP Address: field to” securelogin.customerdomain.com.
B. Change the “Secure Login:” field to “Use Vendor Default”.
C. Change the “IP Address field to “captive portal-login.customerdomain.com”.
D. Add PTR records on the DNS server for “securelogin.arubanetworks.com”.

Correct Answer: B

QUESTION 11

What is the Secure SSID {otherwise referred to as Single SSID) OnBoard deployment service workflow?

A. OnBoard Provisioning RADIUS service, OnBoard Authorization RADIUS service. OnBoard Pre-Auth Application service, OnBoard Provisioning RADIUS service
B. OnBoard Provisioning RADIUS service, OnBoard Pre-Auth RADIUS service, OnBoard Authorization Application service. OnBoard Provisioning RADIUS service
C. OnBoard Provisioning RADIUS service, OnBoard Pre-Auth Application service. OnBoard Authorization Application service, OnBoard Provisioning RADIUS service
D. OnBoard Provisioning RADIUS service, OnBoard Authorization Application service, OnBoard Pre- Auth Application service, OnBoard Provisioning RADIUS service

Correct Answer: A

QUESTION 12

Refer to the exhibit:

After the helpdesk revoked the certificate of a device reported to be lost by an employee, the lost device
was seen as connected successfully to the secure network. Further testing has shown that the device
revocation is not working.

What steps should you follow to make device revocations work?

A. Copy the default [EAP-TLS with OSCP Enabled] authentication method and set The Verify certificate using the OSCP option as required then update the correct OSCP URL link of the OnBoard CA. Remove EAP-TLS and map the custom-created method to the OnBoard Authorization Service.

B. copy the default [EAP-TLS with OSCP Enabled] authentication method and set the verify certificate using the OSCP: option as “required” then configure the correct OSCF URL link for the OnBoard CA. Remove EAP-TLS and map the new [EAP-TLS with OSCP Enabled] method to the 802 1X Radius Service.

C. Remove the EAP-TLS authentication method configuration changes are required and add the “EAP-TLS with OCSP Enabled” authentication method in the OnBoard Provisioning service. No other configuration changes are required.

D. Edit the default [EAP-TLS with OSCP Enabled] authentication method and set the Verify certificate using the OSCP option as required then update the correct OSCP URL link of the OnBoard CA Remove EAP-TLS and map the new [EAP-TLS with OSCP Enabled] method to the OnBoard Provisioning Service.

Correct Answer: C

QUESTION 13

Refer to the exhibit:

You configured the 802 1 x service enforcement conditions with the Endpoint profiling data. When the client connects to the network. ClearPass successfully profiles the client but the client always receives an incorrect enforcement profile The configurations in the Aruba controller are completed correctly. What is the cause of the issue?

A. An additional authorization source should be configured for profiling to work.
B. The enforcement policy conditions configured with profiling data are not correct.
C. The enforcement policy rules evaluation algorithm Is not configured correctly.
D. The option, to use cached roles and posture from previous sessions should be enabled.

Correct Answer: B
//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////

Using the Pass4itSure HPE6-A81 dumps real training is the smartest choice to pass the exam. Includes 60+ real exam questions and answers, as well as analytics to help you firmly grasp the knowledge required for Aruba Certified ClearPass Professional (ACCP) certification and achieve HPE6-A81 exam success with ease.

Latest HPE6-A81 dumps: https://www.pass4itsure.com/hpe6-a81.html help you.

HP Aruba Certified ClearPass Expert Written HPE6-A81 Free Dumps Online Download: https://drive.google.com/file/d/1QpOb2x4iefBMmjjuLm6MYZ4dQ1YKrDLS/view?usp=sharing

For additional free practice questions for HP certification, click here.